Try A8 and see what happens in MultiWii and let me know. On MPNG PPM SUM on V2 uses A8 pin, NOT THE PPM SUM PIN What’s wrong? Doesn't the Crius AIOP V2.0 flight controller work with a sum receiver or do I make a mistake? #define PPM_ON_THROTTLEOn all variants I saw values from ACC, altimeter and MAG but no value from transmitter (controlled with multiwiiconf).Įverything works fine if I take advantage of a standard receiver but that’s not my goal. No extra sensors or boxes are required other than the servos to move the control surfaces. AN MINI OSD w/CAN HUB Support DJI A2 Flight Control NAZA V2 & Phantom 2 for. Despite its small size, UAV Navigation's product is a complete autopilot, meaning that the unit contains all of the sensors required to fly the aircraft. FPV Remzibi OSD QR-OSD System APM 6M GPS for Multicopter Airplane Helicopter. #define PPM_ON_THROTTLE // Uncommentingd) TFR4 / R617SP receiver, connected to Gnd, +, A8 Multiwii: #define CRIUS_AIO_PRO_V1 The flight control solution performs precision runway landings without using expensive DGPS/RTK systems. #define PPM_ON_THROTTLEc) TFR4 / R617SP receiver, connected to Gnd, +, A8 Multiwii: #define CRIUS_AIO_PRO_V1 #define PPM_ON_THROTTLE // Uncommentingb) TFR4 / R617SP receiver, connected to new PPM sum input channel Multiwii: #define CRIUS_AIO_PRO_V1 On the AIOP V2.0 I have tried the following variants without success:Ī) TFR4 / R617SP receiver, connected to new PPM sum input channel Multiwii: #define CRIUS_AIO_PRO_V1 With the AIOP V1.0 my sum receivers (TFR4 and R617SP) worked fine. I used this working configuration on the AIO V2.0 to avoid software mistakes. Early autopilot systems did this function during cruise only, but most autopilot now controls all flight from take-off to landing. We Can Help You All drone pilots, new or experienced, benefit from rules and safety tips to help you fly safe. Whether you are flying for fun or work, get the rules, resources, and tools, to help you fly safely. The autopilot system is capable of keeping aircraft stabilized in all three axes laterally, longitudinally, and vertically. The FAA collaborates with industry and communities to advance drone operations and integrate them into the national airspace. I’ve also a Crius AIOP V1.0 with multiwii 2.1 on my copter. The autopilot controls the aircraft using servos. I’ve tested the naked flight controller only connected to USB. I don’t get the PPM sum input channel to work on the new Crius AIOP V2.0 flight controller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |